Care and Cleaning Instructions

Meridian Solid Surface®

Meridian® Solid Surface is made from a non-porous blend of polyester resin and natural mineral fillers. It is solid from front to back and from top to bottom, with no surface coating or overlay finish to disrupt. Your Meridian® Solid Surface has been fabricated by skilled craftsman using premium quality tools and materials. You can protect the beauty of your Meridian® Solid Surface and ensure a long life of trouble-free service by observing the following suggestions.

General Care and Cleaning
1. Meridian Solid Surfacing® is easy to clean using warm water and any normal household detergent, followed with a clear water rinse. Mildly abrasive cleaners may be used with caution on Satin and Matte-Finished Meridian® products. Abrasive cleaners should not be used on Gloss-Finish Meridian® products.
2. Normal household stains and minor abrasions may be easily corrected using a white, green, or maroon Scotchbrite® Scouring Pad.
3. Deep scratches or gouges in your Meridian® Solid Surface may be sanded with standard 220 & 320-grit sandpaper. Depending on the severity of the damage and the finish of your product, we suggest that you begin with the least coarse grit first and work your way up to the finest grit sandpaper. You may then use a Scotchbrite® Scouring Pad to return the product to it's original luster.
4. DO NOT apply sealers, waxes, penetrants, or other topical treatments to your Meridian Solid Surfacing® under any circumstances.

Meridian® Solid Surface shower bases pass the National Association of Homebuilders' full series testing program and are positively certified by the NAHB to the ANSI Z124.1.2-2005 shower unit certification program. See a copy of the test results here.