Measure and Quote

HOW TO REQUEST A QUOTE ON SHOWER PANELS

1. Measure your Shower
A. Measure the width of your shower walls to/from the face of the installed cement board or moisture-resistant wallboard.
B. Measure from the finished floor up to the height at which you want your panels to stop. (You will need to scribe the bottom of the panels at time of install.)

2. Calculate the Finished Size of your Shower Panels
A. All Meridian shower panels are 1/4" thick. Be sure to compensate for this thickness at all inside corner(s) by reducing the width of the adjacent panels.
B. If you are using a custom threshold for your shower base, be sure to adjust the width of your side panel(s) to compensate for the depth of your chosen threshold. (See Threshold Selection Video for help)
C. The finished height of your panels will be the measurement from the finished floor to the point at which you want your panels to stop. All panels will require trimming and scribing at the time of install in order to match the slope of the shower base.

3. Draw your Shower Panels on the PROPOSAL REQUEST for SHOWER PANELS form.
A. All Meridian shower panels are 1/4" thick. Be sure to compensate for this thickness at all inside corner(s) by reducing the width of the adjacent panels.
B. Be sure to adjust the width of your side panel(s) to compensate for the depth of your chosen threshold.
(See Threshold Selection Video for help)
C. The finished height of your panels will be the measurement from the finished floor to the point at which you want your panels to stop. All panels will require trimming and scribing at the time of install in order to match the slope of the shower base

4. Draw your Shower Panels on the PROPOSAL REQUEST for SHOWER PANELS form.

A. Show a measurement for one long and one short side of every panel. Panels will not be manufactured out of square.
B. Be sure to mark all finished edges with an "X"
C. List any requested accessories within the drawing area or in the "Special Instructions" section at the bottom of the form.

5. Send the completed PROPOSAL REQUEST for SHOWER PANELS form to us
A. via email to proposal.request@towersurfaces.com
B. via fax to 330.837.2642
C. via US Mail. Click here for our address.

6. Your proposal will be emailed to you at your specified email address within 24 hours.
If you prefer an alternate delivery method for your proposal, such as by fax or mail, please specify your preference within the "Special Instructions" section on the request form when submitting.