Meridian® Solid Surface Technical Data
Meridian® Solid Surface products are made of a nonporous homogeneous blend of polyester and acrylic resins and natural mineral fillers. Meridian® is solid from front to back and from top to bottom. Meridian® has no overlay finish or surface coating to disrupt. Meridian® is stain resistant to most household reagents and is engineered to be protected from Ultra Violet light contamination.
Meridian® has passed all tests of Solid Surface standard – ANSI / ICPA SS-2001. All tests were performed and certified by the National Association of Homebuilders Research Lab. NAHB is a certified national testing lab and all data is readily available.
Meridian® has been given a Class One fire rating with a flame spread factor of less than 25. Meridian® was tested by a nationally-certified Hardwood Plywoods Manufacturers Association laboratory to comply with the national burn test as stated in ASTM E-84.
Meridian® maintenance is simple and easy as it can be cleaned with normal household detergents. While mildly abrasive cleaners will not harm Meridian® surfaces, it is suggested that non-abrasive cleaners be used to clean the products. Difficult stains or abrasions can be easily conquered with the use of a green Scotchbrite® scouring pad by 3M Corporation.
Meridian® solid surface shower bases pass the National Association of Homebuilders’ full series testing program and are positively certified by the NAHB to the ANSI Z124.1.2-2005 shower unit certification program.
